Bando P20H100 SH QD Timing Belt Pulley (SH) Metal Forming

Bando P20H100 SH QD Timing Belt Pulley (SH) Metal FormingBando P20H100 SH The type of pulley used on a Synchro Link drive depends on a number of factors, including but not limited to, space available, ratios, center distances, horsepower being transmitted, speeds and user preference of mounting systems (i. e. QD, TL or Minimum Plain Bore). With Synchro Link Drives, as with gear or chain drives, circular pitch (usually referred to as pitch) is a fundamental consideration. On the belt, pitch is the distance

Standard NEMA MG-1 Frequency 60//50 Hz Voltage 230/460//190-220/380-415 V Number of poles 4 Degree of Protection IP55 Synchronous speed 1800 rpm Output rating 2 HP Mounting F-1 Flange C Terminal box¹ Left position Enclosure IC411 - TEFC

Nominal Outside Length (mm)2355

772 A Rated torque 2

25 IN Service Factor 1

37 kW) Number of Poles 2 Frequency 60 Hz Rated speed 3515 rpm Slip 2

Bando - 150-DS5M-2000 Synchro-Link® Double Sided Timing Belts provide smooth

Bando - 10-5V1800 To resolve problem applications where belts are flipping over or jumping out of the sheaves

8 % Feedback Device NO FEEDBACK High Voltage Full Load Amps 381

Bando - 400-S14M-4004 HP Anticipating the demand for energy savings and higher horsepower transmission

5 VOLTS 460 AMP 3

8x(Code H) No load current 4

weight³ 73