60MM X 3MM Plow Bolt

60MM X 3MM Plow BoltThis steel bucket pin shim is for a pin with an outer diameter of 60 mm. It is 3 mm thick with an OD of 120 mm. Perfect for when you have space between your bucket ears and your machines hook up. Too much of a gap will cause your Bucket to wobble or chatter around on your machine causing wear and tear on your pins and bushings. A bucket pin shim will work just fine if it is a little larger than the Outer Diameter of your pin but not if it is smaller

This is a 45pn pin for use with 45s series bucket teeth

BOLT ON TOOTH 135-8203

It is 3 mm thick with an OD of 130 mm

11" BRUNNER AND LAY

Please refer to the drawing for specific dimensions

This tooth uses pin 2mg8upr also known as mg8upr

This item protects your excavator buckets base edge or leading edge from wear in between the bucket teeth

The round end is 5/8" in diameter and the part number is Pin Removal Tool #2

This tooth is considered a penetrator style and is found mostly on backhoes

ASPHALT CUTTER B40500 1-1/4X6 SHANK

This is a weld on mount for the vs450 or vs500 pin on vertical shroud

This is a genuine ESCO Ultralok u30s general purpose bucket tooth